Most Popular Products
|
Send Inquirycorrosion protection products
Price 39 INR/ Piece
MOQ : 1000 Pieces
corrosion protection products Specification
- Media
- Corrosion Protection Fluid
- Power
- 0.5 HP
- Structure
- Spray Bottle
- Material
- Mild Steel
- Air Consumption
- 7-8 CFM
- Speed
- 2800 RPM
- Maximum Torque
- 2.5 Nm
About corrosion protection products
We provide products and application solution for corrosion protection (Removal Of Rust Also) for all metal components with oil and without oil or fully dry products. Our German vci paper is most economical solution and does not require to use vci film or oils. single paper gives full protection to your product even for sea travel. Bcoz single VCI Paper gives Full protection So u save atleast 50 percent in rust protection cost. This VCI Paper need general )rain proof pkg) along with it Even for Sea travel.
Single VCI Paper Gives Protection Against Corrosion for Large Machines/Skids/Automotives/Fixtures/Large Size Engineering Components just By Providing VCI paper Pieces at Various locations in Rust Protection Componant inside moisture protection Film.
we Also provide Specialised Rust Removal Solutions.
Robust Protection for Mild Steel
Guard your mild steel equipment and structures with advanced corrosion protection. This product utilizes a high-performance fluid, delivered via a practical spray bottle, ensuring easy application and uniform coverage. Its clear or pale yellow finish remains unobtrusive while shielding against environmental wear, making it ideal for both industrial and commercial environments where longevity and reliability are paramount.
Efficient Application and Quick Drying
You can apply this corrosion protection fluid using a brush, spray, or by immersing the item, adapting easily to different project needs. Its rapid drying time of 15-30 minutes ensures minimal downtime, while the low VOC content guarantees safer air quality during and after use. Cover large surfaces quickly and benefit from the convenience of a product designed for speed and efficiency.
FAQ's of corrosion protection products:
Q: How do I properly apply the corrosion protection fluid for optimal results?
A: For best protection, clean and dry your mild steel surface thoroughly. Apply the fluid evenly using a brush, spray, or immersion, ensuring a uniform coat with a thickness of 15-20 microns. Allow the surface to dry completely (15-30 minutes) before handling or exposing it to corrosive environments.Q: What surfaces and conditions are suitable for using this corrosion protection product?
A: The product is specially formulated for mild steel and should be used within an operating temperature range of 5C to 50C. Avoid applying in direct sunlight, and always store the fluid in a cool, dry place to maintain effectiveness.Q: When and how often should I reapply the coating?
A: Reapplication frequency depends on the operational environment and exposure to corrosive agents. Inspect the protected surface regularly; reapply whenever signs of wear or thinning appear to ensure continuous protection.Q: Where can I purchase this corrosion protection fluid?
A: This product is manufactured in Germany and distributed by authorized dealers, suppliers, retailers, and wholesalers. Contact your local supplier or visit their online platform for availability and ordering information.Q: What is the process for safe storage and handling of this product?
A: Store the fluid in its original spray bottle or sealed container in a cool, dry area away from sunlight. Ensure the storage area is well ventilated, and keep the product away from open flames due to its flash point above 65C.Q: What are the benefits of using this specific corrosion protection fluid?
A: This product offers enduring corrosion resistance with quick drying, low VOC emissions for improved safety, high coverage efficiency, and straightforward application. Its clear or pale yellow appearance preserves the look of the substrate, making it ideal for visible steel components.Q: Is this product safe for use in areas with strict environmental regulations?
A: Yes, with a VOC content of less than 50 g/L, this corrosion protection fluid adheres to stringent environmental standards, making it suitable for use in industries focusing on reducing air pollutants.
Tell us about your requirement
Price:
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
Mobile number
Email
More Products in corrosion protection products Category
Rust remover chemical
Minimum Order Quantity : 3 Kilograms
Usage : Industrial
Size : Standard
Media : Liquid
Material : Metal
Product Type : Rust Remover
Quick Inquiry
Contact Details
PROCESS & ENGINEERING INCORPORATED
GST : 27AAEFP1791K1ZW
GST : 27AAEFP1791K1ZW
Plot No. 11, S No 12, Near Kailash Jeevan Factory, Dhayari, Pune - 411041, Maharashtra, India
Phone :08071630594
Send Inquiry |
PROCESS & ENGINEERING INCORPORATED
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
